Toshiba RD100KB Owner's Manual page 67

E2TE0BD_EN.book Page 67 Friday, March 5, 2010 4:49 PM
Playback
Setup General Setting Playback
Parental Lock
Audio Out
Disc Menu Language
Audio Language
Subtitle Language
Angle Icon
Still Mode
Variable Skip/Replay
TV System
Parental Lock (Default: OFF) (DVD only)
Set "Parental Lock" level.
Change "Parental Lock" level using [K L],
then press [ENTER OK].
Proceed to either of the following steps.
Parental Lock
OFF
8
7
6
5
4
3
2
1
Parental level
OFF : All parental locks are cancelled.
8 : DVD software of any grade (adult / general /
children) can be played back.
7 to 2 : Only DVD software intended for general use
and children can be played back.
1 : Only DVD software intended for children can be
played back.
Note
• "Parental Lock" function may not be available on some
discs.
• It may be difficult to determine if some DVDs support the
parental lock function. Be sure to confirm that
"Parental Lock" function operates in the way that you
have set.
• Record the password in case you forget it.
A password is not yet set
1
Select "Yes" using [K L], then press
[ENTER OK].
Change Password?
Yes
No
2
Enter a new password using
[the Number buttons], then press
[ENTER OK].
Password Input
Your setting is activated.
If you select "No", press [SETUP] to exit.
A password is already set
1
Enter the current password using
[the Number buttons].
Password Input
2-A
Select "No" using [K L], then press
[ENTER OK].
Change Password?
Yes
No
"Parental Lock" level is activated.
2-B
Select "Yes" using [K L], then press
[ENTER OK].
Change Password?
Yes
No
Enter a new password using
[the Number buttons], then press
[ENTER OK].
Password Input
Your setting is activated.
(You can change both password and
"Parental Lock" level.)
Note
• Press [CLEAR] to erase numbers entered incorrectly.
• If you forget your password or you want to clear all
settings in "Parental Lock", enter [4], [7], [3], [7] using
[the Number buttons] at the option window. Your
password is cleared and parental levels are set to
"OFF".
Audio Out
Choose the appropriate audio setting for your external
device.
It will only affect a disc playback.
Audio Out
Dynamic Range Control
PCM
Dolby Digital
MPEG
DTS
Dynamic Range Control (Default: ON)
(DVD only)
Set to "ON" to make the dynamic range narrower.
Dynamic Range Control
ON
OFF
"Dynamic Range Control" function is effective only with
analogue audio connection.
Note
• "Dynamic Range Control" function is available only on
discs recorded in the Dolby Digital format.
67
EN