Zanussi ZI 9454A Instruction Booklet page 16

• If using a 100 mm plinth, fit the complete height
compensation strip.
Alignment height of 870 mm
• If using a 190 to 220 mm plinth, make a shown.
• If using a plinth higher than 150 mm but less than
190 mm, cut the height compensation strip
supplied with the appliance to the required depth
and fit it between the plinth and the ventilation
grille.
• If using a 150 mm plinth, fit the complete height
compensation strip.
• If the appliance is installed at the end of a row of
units, insert foot E to hold the plinth in place.
31