Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi ZI 9454 X
Summary of Contents for Zanussi ZI 9454 X
- Page 1 FRIDGE-FREEZER ZI 9454 X INSTRUCTION BOOKLET 2222 214-73...
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. - Page 3 IMPORTANT SAFETY INFORMATION Building the appliance in • Fit the appliance into the recess. • Fix it to the wall with the appropriate bracket.
-
Page 4: Table Of Contents
CONTENTS Instructions for the User Important Safety Information Operation Before using Use of the freezer - Control panel Freezing fresh food Storage of frozen food Thawing Making ice cubes Freezer compartment Useful hints for freezing Use of the refrigerator - Control panel Air recycling Refrigerator compartment Maintenance and Cleaning... -
Page 5: Operation
OPERATION Before using Remove all securing tapes. Wash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry thoroughly. Use of the freezer Control panel ON/OFF light Freezer button ON/OFF... -
Page 6: Freezing Fresh Food
F. Alarm reset light G. Alarm reset button In the event of an abnormal temperature rise inside the freezer (e.g. power cut) warning light (F) will start to flash and a buzzer will sound. After the temperature has returned to normal, the warning light (F) will continue to flash, although the buzzer has stopped. -
Page 7: Thawing
Thawing Frozen food, prior to being used, can be thawed in the fridge or at room temperature depending on the time available. Small food items may even be cooked from frozen; in this case cooking will take longer. Any frozen food which is allowed to thaw accidentally should either be eaten as soon as possible or thrown away. -
Page 8: Use Of The Refrigerator - Control Panel
Use of the refrigerator Control Panel ON/OFF light Fridge button ON/OFF Temperature setting button (warmest) Temperature indicator panel J. Light ON/OFF K. Button ON/OFF Press the button (K). The pilot light (J) switches on. OFF: Keep the button (K) pressed until the pilot light (J) and the temperautre indicator switches off. -
Page 9: Air Recycling
Air recycling The refrigerator compartment is equipped with a special D.A.C.(Dynamic Air Cooling) fan which can be turned on with the button (R- see the control panel). The green light (see fig. 1), when on, means that the fan is working. It is suggested that the fan (D.A.C.) be used when the ambient temperature exceeds 25°C . -
Page 10: Maintenance And Cleaning
MAINTENANCE AND CLEANING Before carrying out any maintenance operations, including those described in this book, unplug the appliance from the mains supply. Warning This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorised technicians. Periodic cleaning Clean the inside of the appliance and the accesso- ries with a solution of lukewarm water and bicar-... -
Page 11: Something Not Working
SOMETHING NOT WORKING Important: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation a charge will be made, even if the appliance is under guarantee. Before contacting your local Service Force Centre, check the following points: Symptom No power to the appliance The light does not come on... -
Page 12: Service And Spare Parts
Please note that a valid purchase receipt or guarantee documentation is required for in-guarantee service calls. CUSTOMER CARE DEPARTMENT For general enquiries concerning your Zanussi appliance or for further information on Zanussi products, please contact our Customer Care Department by letter or telephone at the address below or visit our website at www.zanussi.co.uk... -
Page 13: Guarantee Conditions
Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of the purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electricity supply stated on the rating plate. -
Page 14: Technical Specification
TECHNICAL SPECIFICATIONS POWER SUPPLY VOLTAGE AND FREQUENCY TOTAL POWER ABSORBED AVERAGE DAILY UNITS ELECTRICITY * GROSS CAPACITY NET CAPACITY STAR RATING This figure is based on standard test results in accordance with European Standard EN 153. Actual consumption will depend on how the appliance is used and where it is located. 220-240 V / 50 Hz 240 W 1.50 kWh... -
Page 15: Installation
INSTALLATION Warning IF YOU ARE DISCARDING AN OLD APPLIANCE THAT HAS A LOCK OR CATCH ON THE DOOR, YOU MUST ENSURE THAT IT IS MADE UNUSABLE TO PREVENT YOUNG CHILDREN BEING TRAPPED INSIDE. Positioning This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rating plate, which is located at the left on the inside of the... -
Page 16: Electrical Connection
The cover/carrier is indicated by the coloured insert at the base of the plug. A replacement cover/carrier must be obtained from your local Zanussi Service Force Centre. This appliance complies with the E.E.C. Directive No. 87/308 of 2.6.87 relative to radio interference suppression. -
Page 17: Positioning
POSITIONING Height adjustment The height of the appliance is adjustable from 820 to 870 mm to line up with existing kitchen units. Before installing the appliance between units, adjust the height of the feet and rear wheels. The wheels are factory set for a height of 820 mm. To align the appliance to a height of 870 mm, raise it by adjusting the feet with a spanner, then remove the wheels and refit them in the lowest position. -
Page 18: Building The Appliance In
Building the appliance in • The top of the appliance must be kept clear to allow correct air circulation. If a wall unit is fitted above the appliance, there must be a gap of 50 mm between this unit and the wall and it must be at least 50 mm below the ceiling. - Page 19 • If using a 100 mm plinth, fit the complete height compensation strip. Alignment height of 870 mm • If using a 190 to 220 mm plinth, make a cut-out as shown. • If using a plinth higher than 150 mm but less than 190 mm, cut the height compensation strip supplied with the appliance to the required depth and fit it between the plinth and the ventilation...
- Page 20 © Electrolux plc 2004...