Table of Contents
Advertisement
Line input
For connection to
a line level device;
(CD players etc)
Headphone output
Rear mini jack output
PSU connection
To prevent damage to
your Xone:22 only use
an
A&H
approved
power supply
Main outputs
Connect these to a PA
amplifier
using
profes-
sional balanced XLR con-
nectors
for
maximum
hum and noise rejection.
Do not short either
pins 2 or 3 to ground.
For unbalanced opera-
tion use pin 2 only and
leave pin 3 floating.
Failure to observe this
could result in damage
to your Xone:22
REAR PANEL CONNECTIONS
Phono inputs
For connection to turntables only; this input has RIAA equalization for
moving magnet cartridges.
Note: these inputs can be converted to Line with internal jumper links
Effects SND output
Connect this output
to the input of an ex-
ternal effects unit.
Monitor output
Connect to a powered
speaker or Hi-FI system
Effects RTN input
Connect this input to
the
output
of
an
external effects unit.
Record output
Use to record your mix.
Connect to a Minidisk re-
corder, cassette deck or
computer, etc
Line input
For connection to
a line level device;
(CD players etc)
Grounding post
Mainly used to con-
nect the ground wire
from some turntables
to minimise hum
10
Hide quick links:
Advertisement
Table of Contents
