IDE Controller
For setting the IDE devices.
Both
Primary
Disabled
FDD Controller
For setting the floppy disk driver.
Disabled
Enabled
Infrared Port
For setting the Infrared Port.
Disabled
Enabled
Auto
Mode
This is displayed when the [Infrared Port] is either set to [Enabled] or
[Auto].
SIR/ FIR/ ASK-IR
Base I/O address
This is displayed when the [Infrared Port] is set to [Enabled]. Here the
Base I/O address is set.
Please do not assign it to the same address like the [Base I/O address] of
the [Parallel Port].
3F8 IRQ4/ 2F8 IRQ3/ 3E8 IRQ4/ 2E8 IRQ3
DMA channel
This is displayed when the [Infrared Port] is set to [Enabled] and [FIR] is
selected in [Mode].
Please do not select the same channel as the [DMA channel] for the
[Parallel Port].
DMA 0/ DMA 1/ DMA 3
6-8 BIOS Setup
Standard IDE controller and additional IDE
controller are used at the same time
Only the standard IDE controller is used
Not activated
Not activated
Activated
Not activated
Activated
Detects automatically
User's Manual