Toshiba Satellite 30DVD User Manual page 112

A message saying "The Microsoft Dial-up Adaptor is not
installed or it does not respond correctly" is displayed and
the connection is cut off
The Dial-up Adaptor and the TCP/ IP are not installed.
Please follow the steps below to install them:
1. Open the Control Panel and double click on Network.
The Network screen appears.
2. In the Configuration tab, check if the following components are
listed as installed network components.
•
•
3. If the Dial-up Adaptor or TCP/ IP are not displayed, click on the
Add button.
The Select Network Component Type screen appears.
4. Add the Dial-up Adaptor and TCP/ IP.
5. Adding the TCP/ IP.
6. Click on Protocol and click on the Add button.
The Select Network Protocol screen appears.
7. Select Microsoft in Manufacturer and select TCP/ IP in Network
Protocols.
8. Adding the Dial-up Adaptor.
9. Click on Adaptor and click on the Add button.
The Select Network Adaptor screen appears.
10. Select Microsoft in Manufacturer and select Dial-up Adaptor in
Network Adaptors.
11. Click on the OK button.
You return to the Network screen.
12. Click on the OK button
13. Follow the instructions and restart the computer
User's Manual
Dial-up Adaptor
TCP/ IP
Troubleshooting 8-17