Toshiba Satellite 30DVD User Manual page 5

CE compliance
This product and the original options are designed to observe the related
EMC (Electromagnetic compatibility) and safety standards. However,
Toshiba should not guarantee that this product still observes these EMC
standards if options or cables not produced by Toshiba are connected or
implemented In this case the persons who have connected/ implemented
those options / cables have to assure that the system (PC plus options /
cables) still fulfils the required standards. To avoid in general EMC
problems following advice should be observed:
Only CE marked options should be connected / implemented
Only best shielded cables should be connected
Conformity Statement
The equipment has been approved to [Commission Decision "CTR21 "] for
pan-European single terminal connection to the Public Switched
Telephone Network (PSTN).
However, due to differences between the individual PSTNs provided in
different countries the approval does not, in itself, give an unconditional
assurance of successful operation on every PSTN network termination
point.
In the event of problems, you should contact your equipment supplier in
the first Instance.
Network Compatibility Statement
This product is designed to work with, and is compatible with the following
networks. It has been tested and found to conform with the additional
requirements contained in EG 201 121.
Germany
Greece
Portugal
Spain
Switzerland
All other countries
Specific switch settings or software setup are required for each network,
please refer to the relevant sections of the user guide for more details.
The hookflash (timed break register recall) function is subject to separate
national type approval. It has not been tested for conformity to national
type regulations, and no guarantee of successful operation of that specific
function on specific national networks can be given.
User's Manual
- ATAAB AN005, AN006, AN007, AN009, AN010,
and DE03, 04, 05, 08, 09, 12, 14, 17
- ATAAB AN005, AN006 and GR01, 02, 03, 04
- ATAAB AN001, 005, 006, 007, 011 and
P03, 04, 08, 10
- ATAAB AN005, 007, 012, and ES01
- ATAAB AN002
- ATAAB AN003, 004
v