Travis Industries DVL GSR Insert Owner's Manual page 33

Manual On-Off / Smart Thermostat / Standard Thermostat
Use the thermostat button to cycle through the three thermostat settings (see Figure 5).
MANUAL ON/OFF – The burner will turn on and off using the remote (see Figure 6). Press the
On/Off button to control the burner. When off, the display will only show the current temperature.
SMART THERMOSTAT – While in smart thermostat, the transmitter will control the burner to
achieve the target temperature (see Figure 7 below). Flame height will be adjusted up or down to
allow operation without turning the burner on and off (also called "smart modulation). To adjust
the target temperature, press the up and down buttons until a suitable temperature is achieved.
When in smart thermostat
setting, the word "SMART"
STANDARD THERMOSTAT - While in standard thermostat setting, the transmitter will turn the
burner on and off to achieve the target temperature (see Figure 8 below). To adjust the target
temperature, press the up and down buttons until a suitable temperature is achieved.
When in standard thermostat
setting, the word "ON" will
NOTE: if the transmitter batteries go dead while in thermostat setting (standard or smart), the appliance
will shut off after approximately 24 hours.
© Travis Industries
Operation
Look here for the
thermostat setting.
F
ON
MAX AUX
When in manual setting, the
word "OFF" will appear here.
SMART
will appear here.
MAX
ON
appear here.
MAX
Press the thermostat button to cycle
through the thermostat settings.
ON
OFF
MAX MAX AUX
F
This is the target temperature
on the read-out. Use the up
or down buttons to adjust the
target temperature.
AUX
F
This is the target temperature
on the read-out. Use the up
or down buttons to adjust the
target temperature.
AUX
4091008
OFF
SMART
F
100-01236_000
33
Figure 5
Figure 6
Figure 7
Figure 8