Crestron TPS-6X Series Operation Manual page 7

Crestron TPS-6X Series
Operations Guide – DOC. 6875B
High quality backlit laser engraving lends a crisp, legible appearance to button text
in both darkened and fully lit rooms
labeling suited to a typical home theater or multimedia presentation application. If
needed, customized engraving can be attained simply using Crestron Engraver
software. A no-button front bezel is also included with the TPS-6X, which may be
installed in place of the button bezel for a very clean appearance with no front panel
pushbuttons.
Two additional "trigger" style buttons are positioned on top of the TPS-6X for easy
control of the display brightness, Sleep mode and other programmable functions.
High Powered Wireless
The TPS-6X brings a new level of wireless versatility to the Isys family of
touchpanels. With both 2-way RF and 1-way IR wireless capabilities built in, the
TPS-6X offers a choice of wireless platforms to suit the environment.
Crestron high power 2.4 GHz RF technology allows long range performance up to
200 feet (61 meters) indoors
(sold separately). For even greater coverage, the TPS-6X supports roaming among
up to eight RF gateways. A range of selectable RF channels and power levels helps
to maximize performance for both small and large facilities, from boardrooms,
classrooms and home theaters to auditoriums and convention centers. High speed
bidirectional communication supports true feedback with dynamic graphics and text,
affording the capabilities of a wired Isys touchpanel in a fully wireless portable
package.
Built in IR capability affords a wireless alternative that is immune to extremely noisy
RF environments and suitable for sensitive applications where RF may not be
permitted. An operational range of up to 50 feet (15 meters) line-of-sight is possible
using a C2N-IRGW IR Gateway or CNXRMIRD IR Receiver (both sold separately).
TableTop Tilt Docking Station
Placing the touchpanel onto the TPS-6X-DS (or with the TPS-6XNL models, the
TPS-6XNL-DS) Docking Station (included) converts it to a stylish tilt touchpanel,
providing wired communications and video capability while charging the
touchpanel's internal battery. Both wired Ethernet and Cresnet
available so when the touchpanel is placed on the docking station, it can switch
automatically from RF wireless to fully wired operation if either Ethernet or Cresnet
is connected. Without a wired connection present, the touchpanel will continue to
operate wirelessly while it charges.
The docking station features a tiltable docking port, allowing the touchpanel to be
tilted at any angle up to 45 degrees for optimal viewing and operation when docked.
The angle can be freely adjusted or locked down at a fixed angle
help guide the touchpanel onto the docking port and hold it in place and a finger
operated latch can be engaged at any time to secure the touchpanel to the docking
3
station . The touchpanel can even be attached to the docking station semi-
permanently for a sleek, full time tabletop touchpanel solution
A single cable exits the rear of the docking station base, extending to a wall or
surface mounted TPS-6X-IMCW Interface Module (included). The cable can also be
repositioned to exit the bottom for a very clean, cordless appearance.
1. Text engraving is not backlit on the white models.
2. 100 to 200 feet (30-61 meters) indoor range, subject to site specific conditions.
3. Models with "No Lock" docking stations omit the finger operated latch and locking pin features.
Isys™ 5.7" Wireless Touchpanels
1
. The pushbuttons come pre-engraved with
2
using the CEN-HPRFGW High Powered RF Gateway
Isys™ 5.7" Wireless Touchpanels: TPS-6X Series • 3
®
connectivity are
3
. Strong magnets
3
.