Harmar Mobility AL003 Installation And Owner's Manual page 3

Bumper Mount
( Be sure to comply with
vehicle's bumper rating )
Do not attempt to
mount up from under
DETERMINE BEST MOUNTING HEIGHT
Harmar recommends maintaining 8-12" of ground
clearance from the bottom of the unfolded platform,
while not exceeding 45 degrees of tilt ( 12" off the ground )
To achieve this, a number of mounting options are available.
Measure from Hitch Bar to ground
ORIENTATION OF CLASS 2 and CLASS 3 HITCH ADAPTERS IS IDENTICAL
CLASS 1
( Flat Bar Style )
Omit stabilizer
REMOVE,
MOVE UP,
RE-ATTACH
AS SHIPPED
10-14"
8-12"
NOTE:
IF FLIPPING HITCH ADAPTER FOR BETTER HEIGHT,
OR
BOTH PARTS MUST BE FLIPPED TOGETHER.
ORIENTATION OF THESE PARTS IS IMPORTANT
FOR THE TILT AWAY FEATURE LIMITS.
Hitch Adapter Installation
CLASS 3
( 2 x 2 TUBE )
Refer to diagram below
for proper orientation
( right side up or upside down )
Determines carrier's height
from the ground
REMOVE,
FLIP,
RE-ATTACH
12-16"
CLASS 2
( 1.25 x 1.25 Solid Bar )
8-12"
45 max
REMOVE,
FLIP, MOVE UP,
RE-ATTACH
14-18"