Harmar Mobility AL003 Installation And Owner's Manual page 2

Unpacking the Lift
HOLD
DOWN
ARM
CARRIER
ASSEMBLY
Each Tilt and Tote is packaged with a Class 1 Hitch Adapter and Stabilizer.
If a Class 2 or Class 3 hitch adapter is required, separate parts must be ordered.
Be sure and check the contents of the box against the package check list to be sure
that all parts are included with the carrier that are required for proper installation. If
any parts are missing or if any damage is noted, immediately contact the distributor
from which you purchased your lift. DO NOT attempt to install or use the lift with any
missing or damaged parts.
CLASS 1
STABILIZER
OPTIONAL
CLASS 2
OR OR
OPTIONAL
CLASS 3