VDO Cyclecomputing Z2 PC-LINK Instruction Manual page 46

INSTRUCTION MANUAL
No speed display
No cadence display
- Check the magnet position
(distance between magnet
and transmitter, position of the
magnet to the transmitter point
on the transmitter)
- Check the battery in the
transmitter
- Check the battery in the
computer (if battery voltage is
insufficient then the receiver
cannot receive the signals)
- Check the magnet position
(distance between magnet
and transmitter, position of the
magnet to the transmitter point
on the transmitter)
- Check the battery in the
transmitter
- Check the battery in the
computer (if battery voltage is
insufficient then the receiver
cannot receive the signals)
No speed display (dash in the
display)
No cadence data (dash in the
display)
No pulse display (dash in the
display)
No average pulse
No maximum pulse
The receive channel for speed is
switched off (a 15-minute period
has elapsed without receiving a
speed signal)
Press buttons ¥ + ç at the
same time
The receive channel for cadence
is switched off (a 15-minute
period has elapsed without
receiving cadence signals)
Press buttons ¥ ç at the
+
same time
The receive channel for pulse is
switched off (a 15-minute period
has elapsed without receiving
pulse data)
Press buttons ¥ ç at the
+
same time
Timer has not been started
Start timer
Timer has not been started
Start timer
37