Something Not Working - Zanussi ZTB 200 Instruction Booklet

125980991 -gb.qxp 2005-03-15

Something not working?

Before contacting your local Zanussi Service Centre, please make the following checks:
Problem
• The dryer does not work:
• The dryer does not dry properly:
If, after the above checks, there is still a fault, call
your local Zanussi Service Centre.
Please make sure you give the model and serial
number of the appliance.
This information can be found on the rating plate
(see picture on page 6).
13:50 Page 15
Possible cause
• The door is open.
• The plug is not fitted into the wall socket.
• There is no electricity supply from the wall socket.
• The selector dial is not set correctly.
• The start button has not been depressed.
• The filters are clogged.
• The selected cycle is not suitable for the laundry.
• The laundry has not been spun properly.
• The low temperature function has been selected.
• Excessive laundry load.
• The dryer is not correctly installed.
15