Time Oven Mode Operation - Smeg Built-in oven Use & Installation Manual

Hide thumbs Also See for Built-in oven:
Table of Contents

Advertisement

Use & Installation Manual

Time Oven Mode Operation

In double oven models, both ovens can be
set independently to operate a timed mode.
Be sure that the time-of-day clock is
displaying the correct time.
The timed mode turns off the oven at the end
of the cook time.
To Set a Timed Mode
1. Select the oven by means of
[UPPER/LOWER] key, if necessary.
2. Select the cooking mode and the
temperature by means of the knobs. The
"ON" writing will appear in the display.
3. Touch [TIME] key until the "TIME" writings
will appear in the display.
4. Touch [INC] or [DEC], the hour digits will
begin flashing. Continue to set the desired
cooking time. Keep in mind that the time
required for the oven to reach the
temperature must be included in the set
cooking time.
5. Touch [TIME] again, the hours will be
confirmed and the minute digits will begin
flashing.
6. Touch [INC] or [DEC] to change the
minutes. Hold the key to change by 10
minutes steps. Continue to set the desired
cooking time.
7. Touch [TIME] once again or wait for a few
seconds to confirm the cooking time value.
.
To Delay the Start of a Timed Mode
Follow steps 1 through 6 or 7 above.
Touch [TIME] key until "STOP TIME" will
appear in the display.
The control automatically calculates and
display the initial value, adding the cooking
time already set to the time of day.
Touch [INC] or [DEC], the hour digits will
begin flashing. Continue to set the desired
stop time.
Touch [TIME] again, the hours will be
confirmed and the minute digits will begin
flashing.
Touch [INC] or [DEC] to change the minutes.
Hold the key to change by 10 minutes steps.
Continue to set the desired stop time.
Touch [TIME] once again or wait for a few
seconds to confirm the stop time value.
The clock automatically calculates the time of
day at which the mode starts and stops. The
"DELAY" writing is displayed until the starting
time is reached.
When a Timed Mode is running
As soon as the oven actually starts cooking,
the display shows the cooking time and
counts down by one minute steps. The oven
will cook for the programmed time.
When the time expires, the oven
automatically turns off, the writings "ON" and
"TIME" start flashing and an "end of activity"
beep sequence sounds. Reminder beeps will
sound for up to fifteen minutes until any key
is touched in order to recall the user
attention.
How to check a time value
Whenever it's necessary to check a time
value that is not displayed, touch the [TIME]
key until the proper writing is displayed to
view the desired value for 5 seconds.
Example: if the timer value is displayed and
you want to check the cooking time, touch
the [TIME] key until "TIME" is displayed to
view the cooking time for 5 seconds.
15
ENGLISH
Use & Installation Manual
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents