Setting The Clock And Timer - Smeg Built-in oven Use & Installation Manual

Use & Installation Manual

Setting the Clock and Timer

The time of day is displayed in hours and
minutes.
Always set the clock immediately after installation
or after a power failure. Once power returns to
the oven, the clock displays the time 12:00
The clock time will appear during all oven
operations except when there is the timer or any
timed cooking operations running.
The oven is preset to a 12-hour clock and
AM PM
indicates and .
To Set the Time of Day
1. Touch [TIME] until the display will show the
"SET TIME" writing.
2. Touch [INC] or [DEC] to set the desired time,
the hours will begin flashing: continue until
the correct hour value and
is selected.
3. Touch [TIME] again to confirm the hour and
minutes will start flashing.
4. Touch [INC] or [DEC] to set the desired
minutes value or hold the key to change by
10 minute steps.
5. Touch [TIME] again or wait for 5 seconds in
order to confirm the time.
NOTE: The Time of Day can never be set if any
time function is already set: first delete
all the active time functions.
AM
.
AM PM
or indication
To Set the Timer
1. Touch [TIME] until the display will show the
"TIMER" writing.
2. Touch [INC] or [DEC] to set the desired timer
value, the hours will begin flashing: continue
until the desired value is set.
3. Touch [TIME] again to confirm the hour and
minutes will start flashing.
4. Touch [INC] or [DEC] to set the desired
minutes value or hold the key to change by
10 minute steps.
5. Touch [TIME] again or wait for 5 seconds in
order to confirm the time.
6. "TIMER" will be steadily displayed.
7. When the time ends, reminder beeps will
sound for 15 minutes or until the [TIME] key
is pressed.
8. Timer format is usually HR:MIN, switching
into MIN:SEC during the last minute.
9. The displayed value is always rounded to the
lower minute.
13
ENGLISH
Use & Installation Manual
13