General Oven Information - Smeg Built-in oven Use & Installation Manual

ENGLISH
Use & Installation Manual

General Oven Information

Before using your oven for the first time remove
all packing and foreign materials from the
oven(s). Any material of this sort left inside may
melt or burn when the appliance is used.
Flashing Symbols or Numbers
Signals an incomplete action that is in progress
(locking the door, preheat, etc.) or an incomplete
setting that calls for another input.
Beeps
Signals that more information must be entered
or confirms the receipt of an entry. Beeps also
signal the end of a function or an oven fault.
Locking the door
It's displayed steadily when the door is locked.
The symbol flashes when the latch is moving in
order to lock or unlock the door. Do not attempt
to open the door at this time. Door can be
opened when the symbol no longer appears.
"AUTO LOCK" appears when the door has been
locked automatically due to self-clean mode.
"USER LOCK" is displayed when the door has
been locked manually by the user, for example
to prevent children from having free access to
the oven cavity. Hold both the [INC] and [DEC]
keys for 3 seconds. The latch will lock the door.
Repeat the same operation to unlock.
Locking the keyboard
Hold both the keys indicated by "KEYBD. LOCK"
legend for 3 seconds. Commands are now
locked and "SENS LOCK" will be displayed
every time you touch any keys. Repeat the same
operation for 3 seconds to unlock the keyboard.
Power Failure
After the power returns to the oven, the clock
displays the time 12.00
Default Settings
The cooking modes automatically select a
suitable temperature when the selector is in the
preset position. These can be changed when a
different one is needed. It's also possible to set a
user option in order to save the last used
temperature per every cooking mode.
F Failure Number Codes
These codes are displayed when the electronic
control detects a problem in the oven or in the
electronics.
10
AM
.
Convection Fan
The convection fan operates during any
convection mode. When the oven is operating in
the convection mode, the fan will turn off
automatically when the door is opened. The
convection fan always runs during the preheat
time.
Component Cooling Fan
Activates during any cooking or self-cleaning
mode to cool inner components and outer door
surfaces. This air is exhausted through the vent
located above the oven door. It continues to run
until components have cooled sufficiently. The
cooling fan speed is high in self-clean and
whenever the internal components temperature
becomes high.
Preheat and Boost
Whenever a cooking mode is set and the oven is
heating, the "PREHEAT" writing appears in the
temperature display: the vertical bar indicates, in
four steps, when the oven reaches the 25%,
50%, 75%, 100% of the set-point temperature.
As soon as the 100% is reached, the control
sounds an "end of preheat" tone and the
"PREHEAT" writing disappears.
When it's necessary to heat up the oven rapidly,
a Boost mode is available: it uses the
heating elements and the convection fan in a
special way, in order to reduce the heating time
as long as possible.
After having set one of the cooking functions for
which the fast preheat is available, touch the
[BOOST] key, the "FAST" writing is shown in
addition to the "PREHEAT" one.
As soon as the set-point temperature is reached,
the control sounds an "end of preheat" tone and
both "FAST"
disappear. The oven switches automatically to
the desired cooking mode that was previously
set: put the food inside now.
10
Use & Installation Manual
and "PREHEAT" writings