Setting The Clock - Sharp MD-R3 Operation Manual

SETTING THE CLOCK

ENTER
POWER
1
2
CLOCK
3
DATE
CLOCK
Date setting mode
4
Each time the button is pressed,
the display will change.
5
6
7
DATE
CLOCK
Time setting mode
When recording, the date and time are recorded on the Minidisc
(page 18).
DELETE/CLEAR
Setting the date
TIMER
1
Press the POWER button to turn the power on and press
the TIMER button.
2
Within 10 seconds, turn the jog dial until "TIME ADJUST"
appears.
3
Within 10 seconds, press the ENTER button.
The unit will enter the date setting mode.
4
Set the "year" using the jog dial.
When you turn the jog dial and let go, the year will change
up or down by one.
The year 2000 or later is set as follows:
[00] indicates the year 2000.
[01] indicates the year 2001.
The range of dates that can be entered is from January 1,
1997 to December 31, 2099.
5
Press the ENTER button to set the "year".
AM
6
Set the "month" repeating steps 4 and 5.
7
Set the "day" repeating steps 4 and 5.
The unit will enter the time setting mode.
AM
8
MD-R3