Setting The Clock - Sharp MD-R3 Operation Manual

(Continued)
ENTER
8
DATE
CLOCK
9
DATE
CLOCK
10
DATE
CLOCK
11
DATE
CLOCK
Setting the time
After step 7, described in the "Setting the date" section
DELETE/CLEAR
TIMER 8
Set the "hour" using the jog dial.
Turn the jog dial left or right, the hour will increase or de-
crease by one with every click position.
The clock uses the 12-hour system. Pay attention to the AM
or PM indicator on the display.
AM 0:00
9
Press the ENTER button to set the "hour".
10
Adjust the "minute" using the jog dial.
11
Press the ENTER button to set the "minute".
When the ENTER button is pressed, the clock will show the
PM
correct time.
PM
PM
Checking the date and time
After pressing the TIMER button, turn the jog dial until the date
and time are displayed.
PM
Resetting the date and time
See "Setting the clock".
Once you have set the date and time, "TIME ADJUST" will
not be displayed in step 2. Turn the jog dial to make the date
and time appear.
If you do not need to change the settings, just press the
ENTER button without turning the jog dial again.
9
MD-R3
midnight, PM 0:00 noon