Cd And Md Operations - Sharp MD-R3 Operation Manual

CD AND MD OPERATIONS

1 2 3
5 6 7
9 10/0
MD
CD
1 2
12
Selected track number
MD
CD
Direct-selection play (remote control
operation)
4
8
By using the track number input buttons on the remote control,
10
you can play any track you wish directly.
1
Select the desired program source, CD or MD, by pressing
the CD
2
Select the disc to be played by pressing one of the
- 3 buttons. (Only for CD playback)
3
3
Use the track number input buttons to enter the desired track
number.
A. To enter track numbers 11 to 99
Y
Press the 10 button first, then press the track number.
4 0dB OVER
For example to select 28:
4 5 6 7
8 9 10 11 12 13 14
1
Press the
15 16 17 18 19 20
2
Within 5 seconds, press the "2" button.
3
Within 5 seconds, press the "8" button.
B. To select tracks numbered 100 or higher (only for
MDs)
Y
Press the 10 button twice, then enter the track number.
For example to select 105:
1
Press the
2
Within 5 seconds, press the
3
Within 5 seconds, press the "1" button.
4
Within 5 seconds, press the "10/0" button.
5
Within 5 seconds, press the "5" button.
The beginning of the selected track will be found, and play will
begin automatically.
Notes:
You cannot select a track number higher than the number of
tracks on the disc.
APSS (Auto Program Search System)
APSS automatically locates the beginning of each track.
To move to the beginning of the next track:
During playback ... Turn the jog dial clockwise.
Or press the
To restart the track being played:
During playback ... Turn the jog dial counterclockwise.
Or press the
When using the jog dial while in the stop mode:
Every time the jog dial is turned (or each time the
button on the remote control is pressed), the track number will
go up or down by one. If you press the
will begin from the track being displayed.
13
MD-R3
or MD button.
Y
10 button.
Y
10 button.
Y
10 button.
4
button on the remote control.
5
button on the remote control.
06
button, playback
1
5 4
or