Compact Disc Operation - Sharp MD-R3 Operation Manual

COMPACT DISC OPERATION

EJECT
1 2 3
CD DIRECT PLAY
The selected CD tray
DISC
TOTAL 1 2 3 4 5 6 7
8 9 10 11
Total number of Total playing
Music schedule
tracks time
Loading and playing CDs
1
Press the CD
7
2
Press the
It is not possible to open more than one disc tray at any one
time.
3
Place the CDs on the disc tray, label side up.
Be sure to place 8 cm (3") CDs in the middle of the disc
trays.
Caution:
Do not place more than one CD in any tray position.
This can damage the player and the CDs.
7
CD
4
Press the
The CD DIRECT PLAY button will light for the tray loaded
1 2 3
with a CD.
Repeat steps 2 - 4 to load discs into the second and third
disc trays.
The total number of tracks and the total disc playing time will
be displayed.
The music schedule will be displayed only for the number of
tracks on the disc.
If the CD contains more than 21 tracks, "
5
Press the CD
Playback will begin from track 1 on the DISC-1.
DISC-1, DISC-2 and DISC-3 will be played continuously in
that order.
If you press the CD DIRECT PLAY 2 (
pressing the CD
played continuously.
If you press the CD DIRECT PLAY 3 (
pressing the CD
If you press the CD
turning the jog dial, playback will begin on DISC-1, from the
track you selected.
After the disc finishes playing, the next disc will be automat-
ically played.
When there is no CD in one of the disc trays, that tray will
be skipped, and the next CD will be played.
When all of the tracks on the CDs have been played, the unit
will stop automatically.
More
To interrupt playback: 06
tracks
Press the CD
indica-
tion Press the CD
point.
To stop playback:
Press the CD
To remove the CDs:
While in the stop mode, press the
11
MD-R3
button.
button to open the disc tray.
button to close the disc tray.
Y
" will appear.
06
button.
06 2) button after
button, DISC-2 and DISC-3 will be
06 3) button after
button, only DISC-3 is to be played.
06
button after selecting a track by
06 button.
button to resume playback from the same
button.
7
button.