Table of Contents
Advertisement
SM
<P=001>
HOME THEATER SYSTEM
OPERATION MANUAL
Thank you for purchasing this SHARP product.
To obtain the best performance from this product,
please read this manual carefully.
It will guide you in operating your SHARP product.
Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency en-
ergy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING
FCC Regulations state that any unauthorized changes or modifications
to this equipment not expressly approved by the manufacturer could
void the user's authority to operate this equipment.
For your assistance in reporting this unit in case of loss
or theft, please record below the model number and serial
number which are located on the rear of the unit.
Please retain this information.
Model number ______________________________
Serial number_______________________________
Date of purchase ____________________________
Place of purchase ___________________________
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are trade-
marks of Dolby Laboratories. Confidential Unpublished
Works.
served.
HT-DD5000(SEC) TINSE0009SJZZ
MODEL
HT-DD5000
FOR YOUR RECORDS
1992-1997 Dolby Laboratories, Inc. All rights re-
Advertisement
Table of Contents
Related Manuals for Sharp HT-DD5000
Summary of Contents for Sharp HT-DD5000
-
Page 1: Home Theater System
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. - Page 2 CAU TI ON: The lightning flash with arrowhead symbol, within an equilateral triangle, RISK OF ELECTRIC SHOCK, DO is intended to alert the user to the NO T presence of uninsulated "dangerous BACK). voltage" within the product’s enclosure NO USER-SERVICEABLE PARTS that may be of sufficient magnitude to INSIDE.
-
Page 3: Table Of Contents
Using this product with a higher voltage other than which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified. -
Page 4: Preparation For Use
PREPARATION FOR USE Front speaker Front speaker (Left) (Right) Black Black Black (with white line) Black (with white lline) Black Black Black (with white lline) Black (with white lline) Black HT-DD5000(SEC) TINSE0009SJZZ Unplug the AC power cord from the AC outlet before con- necting or disconnecting any component. - Page 5 (Continued) Black Black (with white line) Black (with Black white line) Surround speaker Surround speaker (Right) (Left) Black Black Black (with white line) Black (with white line) Black Caution: Do not reverse the right channel and left channel wires when connecting the speakers to the unit. Do not let bare speaker wires touch each other, as this may damage the amplifier and/or speakers.
- Page 6 (Continued) Center Front left woofer Surround left Same distance Front left Center Example: When installed on the wall Surround speaker Example: When installed vertically 3/32" (2.7 mm) 5/32" (3.8 mm) Min. 9-27/32" (25 mm) 9/32" (7 mm) 5/32" (4 mm) Min.
- Page 7 Keep the remote control away from moisture, excessive heat, shock, and vibrations. SHARP TVs, VCRs and DVDs which are equipped with re- mote control can be controlled with button groups (A), (B) and (C). Some TV and VCR models may not have some functions.
- Page 8 (Continued) AM loop antenna FM antenna 49 feet (15 m) Outdoor AM Outdoor antenna FM antenna 25 feet (7.5 m) Ground rod 75 ohm coaxial cable Ground wire AC OUTLET AC 120 V, 60 Hz HT-DD5000(SEC) TINSE0009SJZZ Antenna connection Supplied FM antenna Connect the FM antenna wire to the FM 75 OHMS terminal and position the FM antenna wire in the direction where the strongest signal can be received.
-
Page 9: External Unit Connection
EXTERNAL UNIT CONNECTION Cords required to connect an external unit The following cords are available to connect an external unit. Cord included with this unit Coaxial digital cord RCA cord When connecting the unit to a DVD player When connecting an audio signal using an optical digital cable When connecting an audio signal using a coaxial digital cord Caution: A DVD player allows you to select the "PCM"... - Page 10 (Continued) When connecting the unit to a VCR or a camcorder To the audio output jacks To the audio input jacks To the video output jack To the video input jack When connecting the unit to a tape deck or an MD deck To the audio output jacks MD deck To the audio input jacks...
- Page 11 (Continued) When connecting the unit to a stereo turntable or a CD player CD player To the audio output jacks Stereo turntable How to switch audio signals and video sig- nals When the function button is pressed, a different input signal can be selected.
-
Page 12: Sound Control
(Continued) SPEAKERS SOUND CONTROL (Main unit) (Remote control) VOLUME VOLUME MUTE HT-DD5000(SEC) TINSE0009SJZZ Front speaker selector Select the front speakers you want to use. Before selecting the switches, be sure to set the VOL- UME control to 0. To listen using the "A" speakers: Set the SPEAKERS A button to ON. - Page 13 (Continued) (Main unit) (Remote control) X-BASS X-BASS EQUALIZER FLAT HEAVY 1 HEAVY 2 SOFT 2 SOFT 1 SUB WOOFER LEVEL ( HT-DD5000(SEC) TINSE0009SJZZ Extra bass (X-BASS) (Main unit/remote control operation) Press the X-BASS button to emphasize the bass region of the frequency spectrum.
-
Page 14: Dolby Digital
DOLBY DIGITAL Type of Dolby digital signal There are different types of Dolby digital signals. When you select COAXIAL or OPTICAL for the DVD input channel, the following items will be displayed for 2 seconds. They will also be displayed when the DVD player is operating and the DVD button is pressed. -
Page 15: Surround Effect Control
SURROUND EFFECT CONTROL This product allows you to enjoy 3 surround modes. Normal mode/Wide mode: When you play a sound source that has the (5.1 channels) or trademarks, you can enjoy surround sound using all 6 speakers. HT-DD5000(SEC) TINSE0009SJZZ Phantom mode: When you play a sound source that has the trademarks, you can enjoy surround sound using 5 speakers, but not the center speaker. - Page 16 (Continued) NORMAL/WIDE Center speaker Front speaker Front speaker (Right) (Left) woofer Surround Surround (Left) (Right) PHANTOM Front speaker Front speaker (Right) (Left) woofer Surround Surround (Right) (Left) STEREO Front speaker Front speaker (Right) (Left) woofer PRESET BALANCE HT-DD5000(SEC) TINSE0009SJZZ NORMAL: For a stereo 2 channel input or a Dolby digital 2/0 input, sound will be output from the front left, front right, center and surround speakers.
-
Page 17: Set Up
SET UP MENU SET UP ITEM DIGITAL DIGITAL DIGITAL 2 seconds DIGITAL DIGITAL DIGITAL 2 seconds DIGITAL DIGITAL DIGITAL DIGITAL 2 seconds DIGITAL DIGITAL DIGITAL 2 seconds DIGITAL DIGITAL HT-DD5000(SEC) TINSE0009SJZZ Speaker size setting Press the MENU button repeatedly to make "SP SIZE" appear. - Page 18 (Continued) MENU SET UP ITEM DIGITAL DIGITAL DIGITAL DIGITAL DIGITAL HT-DD5000(SEC) TINSE0009SJZZ Speaker delay setting The best sound will be achieved by placing the front speak- ers, center speaker and surround speakers at the same dis- tance from the listener. When some of the speakers are at a different distance from the listener, you can select a speaker delay to make it seem as though the speaker distances are the same.
- Page 19 (Continued) MENU SET UP ITEM DIGITAL DIGITAL DIGITAL DIGITAL DIGITAL DIGITAL DIGITAL DIGITAL DIGITAL HT-DD5000(SEC) TINSE0009SJZZ Front speaker balance adjustment You can adjust the balance between the left and right chan- nels of the front speakers. Press the MENU button repeatedly to make "SP LEVEL" appear.
- Page 20 (Continued) MENU SET UP ITEM DIGITAL DIGITAL DIGITAL DIGITAL DIGITAL DIGITAL DIGITAL DIGITAL HT-DD5000(SEC) TINSE0009SJZZ Test tone You can check (and adjust) the speaker level by listening to the sound output from each speaker individually, while stand- ing at the actual listening position in the room. The speaker level can be adjusted using the remote control.
- Page 21 (Continued) MENU SET UP ITEM DIGITAL DIGITAL DIGITAL DIGITAL HT-DD5000(SEC) TINSE0009SJZZ Dynamic range setting DVD discs have a wider dynamic range (sound volume range) than existing VHS videotapes or CD discs. If they are played in home systems, there may be too much difference between the loud and quiet sounds.
-
Page 22: Radio Operation
RADIO OPERATION 2,3,5,6 HT-DD5000(SEC) TINSE0009SJZZ Tuning Set the POWER button on the main unit to ON. Press the TUNER (BAND) button. Press the TUNER (BAND) button again to select the de- sired frequency band. (FM ST, FM or AM) Press the TUNING (UP or DOWN) button to tune into the desired station. - Page 23 (Continued) PRESET HT-DD5000(SEC) TINSE0009SJZZ Preset tuning You can store up to 40 stations in memory (40 stations con- sisting of any combination of FM and AM stations you like) and recall them at the push of a button. To enter stations into memory: Perform steps 1 - 6 in the "Tuning"...
-
Page 24: How To Use The Built-In Timer
HOW TO USE THE BUILT-IN TIMER TIMER HT-DD5000(SEC) TINSE0009SJZZ Timer playback Timer operation is only possible when the TUNER func- tion is selected. Set the POWER button on the main unit to ON. Press the TUNER (BAND) button. Tune in the desired station. Press the TIMER/SLEEP button repeatedly until "TIMER"... -
Page 25: Headphones
(Continued) HEADPHONES HT-DD5000(SEC) TINSE0009SJZZ Sleep operation The tuner and any components that are connected to the DVD, VCR-1, VCR-2, CD/AUX, MD/TAPE or PHONO jacks can be turned off automatically. Play back the desired sound source. Press the TIMER/SLEEP button repeatedly until "SLEEP" is displayed. -
Page 26: Description Of Terminology
DESCRIPTION OF TERMINOLOGY Dolby Pro Logic Surround: This refers to the Dolby Surround sound decoder system which is used for movies. Using 4 channels, the sound ef- fects, dialog, sound direction, music, etc. are all reproduced more realistically. Dolby Pro Logic Surround makes the lo- cation and movement of sounds much more natural than the original Dolby Surround system. -
Page 27: Maintenance
MAINTENANCE SPECIFICATIONS As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of pro- duction units. There may be some deviations from these values in individual units. -
Page 28: Consumer Limited Warranty
Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer.