Sharp HT-DV40U Operation Manual page 30

HT-DV40U
Changing the set up menu (continued)
HT-DV50U
ENGLISH
Rating setting
1
Select "SYSTEM SET UP" on the Set up menu screen (see
steps 1 - 6 on page 23).
2
Before setting "RATING", ensure password is unlocked
" ". The "RATING" level cannot be set if the password is
locked " ".
3
After selecting "RATING" in steps 1 - 6 on page 23, select the
rating level and press the ENTER button to confirm.
4
After entering rating level, select "PASSWORD" to lock the
password key.
5
Enter a 4-digit password using the Direct Search buttons
and press the ENTER button.
*If this is the first time, enter "0000" as factory default password.
Indicator
1 KID SAFE
2G to 7 NC-17
8 ADULT
* Level 8: for most restrictive viewing ===> Level 1: for general
audiences viewing.
The smaller the number, the greater the level of restriction.
Note:
Whilst playing a disc with parental lock, the display may appear
requesting a password in order to watch some restricted scenes. In
such case, enter the password to temporarily change the parental
level.
E-29
Setting
Only DVD software intended for children can be
played back.
Only DVD software intended for general use and
children can be played back.
DVD software of any grade (adult/general/
children) can be played back.
Password setting
From the set up menu, select "SYSTEM SET UP", "PASSWORD"
and choose "----- ".
1
When setting the password for the first time, enter the
factory default password by pressing "0000". The "
be unlocked.
2
Enter your new password (maximum 4-digits) using the
Direct Search buttons and press ENTER button to return.
The " " will be locked.
3
Enter again the same new password and press ENTER
button to return. The " " will be unlocked.
4
To change to another password, repeat steps 2 - 3.
5
Exit set up.
Note:
If you forget your password, cancel the current password by pressing
"0000" using the Direct Search buttons.
" will