Changing The Set Up Menu - Sharp HT-DV40H3 Operation Manual

Changing the set up menu

HT-DV40H3
HT-DV50H3
ENGLISH
E-21
1 2 3
4 5 6
7 8 9
0 +10
1
Turn on the TV.
2
Set the TV to the correct input, eg. "AV1", "VIDEO", etc.
3
Turn on the unit by pressing the
ON/STAND-BY button.
The SHARP startup screen appears.
Note:
Startup screen will be displayed when
both S-Video cable and SCART cable
are connected to the TV. If only the S-
Video cable is connected, the screen
may be blank. To set up S-Video mode,
use video out cable or SCART cable.
4
Press the SHIFT and SET UP buttons.
5
Press the or button to select a menu.
See the list on pages 22 - 27 for set up menu.
6
Press the , , or
press the ENTER button.
7
After setting is completed, select
"EXIT SET UP", then press the ENTER
button to return to the main page.
Notes:
The setting are stored even if the unit is set to stand-by mode.
The backup function protects the stored setting for a few hours
should there be a power failure or AC power lead disconnection.
System set up can be performed during playback mode.
button to change the setting and