Sharp HT-DV40H3 Operation Manual page 71

To change the audio mode/Bi-LANGUAGE
setting
Sound of the playback source can be switched among the STEREO,
L-CH, R-CH, and V-CANCEL (VOCAL CANCEL) modes.
The audio mode function is used when the left and right channels
have individual signals from each other.
Press the KARAOKE button on the remote
control until the desired audio mode is dis-
played.
Each time the KARAOKE button is pressed,
the mode will change as follows:
STEREO L-CH
STEREO Sounds on the left and right channels are played.
L-CH Sounds on the left channel only are played.
R-CH Sounds on the right channel only are played.
V-CANCEL The main vocal is lowered.
Notes:
The initial audio mode setting is "STEREO".
In any mode other than the STEREO mode,
The setting will remain unchanged when you change the disc, you set the
unit to the stand-by mode or the function is changed from the CD to
another function.
When playing a sound multiplexed disc on which a vocal and music have
been separately recorded, select the audio mode as desired.
1 2 3
4 5 6
7 8 9
0 +10
R-CH V-CANCEL
" "
will appear.
To change general stereo source to karaoke
source
Even ordinary discs not recorded specifically for karaoke can be
used for karaoke just by toning down the main vocal.
Press the KARAOKE button on the remote control until "V-CAN-
CEL" appears in the display.
Notes:
Use discs recorded in stereo. The function will not work with mono
sources.
With some discs the original vocals may still be heard.
Notes on sound multiplexed karaoke discs:
Sound multiplexed karaoke discs are discs on which the main vocal and
the BGM (Background music) have been recorded on one of the two
channels and only the BGM on the other.
The function will not work properly with discs which do not belong to this
group.
Discs on which vocal has been recorded on the left channel and music on
the right may not play properly.
HT-DV40H3
HT-DV50H3
ENGLISH
E-58