Sharp HT-DV40H3 Operation Manual page 73

4
Within 10 seconds, press the
"ONCE SET" or "DAILY SET", and press the MEMORY/
DIMMER button.
5
Press the or button to adjust the hour and then
press the MEMORY/DIMMER button.
The illustrations show the timer playback setting in the daily
timer mode.
6
Press the or button to adjust the minutes and then
press the MEMORY/DIMMER button.
7
Set the time to finish as in steps 5 and 6 above.
8
or button to select
9
10
Switch input with the or
MEMORY/DIMMER button.
To select the timer playback source: DVD/CD, USB, OPTICAL
1, OPTICAL 2, AUX IN, SCART or TUNER.
When you select the tuner, select a station by pressing the
or button, and then press the MEMORY/DIMMER
button.
If a station has not been programmed, "NO PRESET" will be
displayed and timer setting will be cancelled.
Adjust the volume using the VOLUME control, and then
press the MEMORY/DIMMER button.
Do not turn the volume up too high.
Press the ON/STAND-BY button to enter the power stand-
by mode.
The "TIMER" indicator lights up and the unit is ready for timer
playback.
HT-DV40H3
HT-DV50H3
ENGLISH
button, and then press the
Continued to the next page
E-60