Sharp HT-DV40H3 Operation Manual page 29

CP-DV50H
1 Route the speaker wire through a stand hole and attach the
bottom cabinet to stand.
2 Fix them securely with the supplied 3 washer screws.
Bottom
cabinet
Speaker
wire
Stand
3 Attach the top cabinet to bottom cabinet and fix them securely
with the supplied 2 screws.
4 Connect the wire without insulation tube to the speakers minus
(-) terminal, and the wire with red insulation tube to the speakers
plus (+) terminal.
5 Connect the other end of speaker wire to the main unit.
Top Warning:
cabinet Fix the speaker stand properly according to this manual. Improper
fixing may cause speaker to fall leading to injury or breakage.
To ensure a proper fixing, contact your dealer or installer.
During fixing, be careful not to pinch your fingers.
Do not modify or change the stand. It may cause the speaker to
fall leading to injury or breakage.
HT-DV40H3
HT-DV50H3
ENGLISH
E-16