Preventive Maintenance Schedule - Yamaha GLADIATOR Ower's Manual

PREVENTIVE MAINTENANCE SCHEDULE

SNO ITEM
Check valve clearances, adjust if necessary.
1 VALVES
Check condition, gap;
2
SPARK PLUG
Clean and reset if necessary.
3
CARBURETOR Check idle speed, Starter lever operation.
1. TPS (Throttle Position Sensor)
CAUTION :
1. Do not Tamper/Adjust with TPS (fig-1)
2. Do not Open BS (Butterfly slide) Valve Screws (fig-2)
Clean, inspect & lubricate. (replace if necessary)
4 AIR FILTER *
Check fuel hose, for cracks or damage.
5 FUEL LINE
Replace if necessary.
Check for free flow of petrol, cleanliness of filter bowl,
6 FUEL FILTER
replace if necessary.
Replace with recommended oil - Yamalube SG Grade
7 ENGINE OIL
(Warm engine before draining)
Wash with petrol
8 ENGLINE OIL FILTER SCREEN
Check operation./ Adjust if necessary.
9 BRAKE REAR
Grease the brake cam.
10 BRAKE SHOES-REAR Check for wear, replace if necessary.
Check Level Refill if necessary
11 BRAKE FLUID LEVEL
Check for scoring marks on disc Face and Run out
12 BRAKE DISC
13 BRAKE PADS Check for wear
Check for leakage
14 MASTER CYLINDER & CALIPER
Check operation, fluid level and vehicle fluid leakage
15 FRONT BRAKE
Replace Brake Pads
PERIODIC MAINTENANCE AND MINOR REPAIR
OPERATION
2. BS (Butterfly Slide) Valve Screws
6-3
DURING SERVICE DAYS OR KMS
AFTER
WHICHEVE OCCURS FIRST
90 DAYS OR 180 DAYS OR
30 DAYS OR
2000 KMS
4500~5000 KMS
500~700 KMS 2500~2700 KMS
REPLACE EVERY 10,000 km
WHENEVER WORN TO THE LIMIT