Yamaha GLADIATOR Ower's Manual page 47

CAUTION :
• Maintain chain slackness
within specified limits as per
specifications.
• To maintain correct axle
alignment, Ensure the notch
on the adjuster is on the same
Mark on Left and Right Side.
5. After adjusting, be sure to tighten
each chain adjusting locknut.
Then tighten the axle nut to the
specified torque.
Tightening torque:
Axle nut:
65 ft-lb (9.05 m-kg)
PERIODIC MAINTENANCE AND MINOR REPAIR
1. Cotter pin
6. Insert a new cotter pin into the
axle nut and bend the end of the
cotter pin as shown. If the notch in
the axle nut and the cotter pin
hole do not match, tighten the nut
slightly to align them.
WARNING
Always use a new cotter pin on
the axle nut.
6-21
7 Adjust the free play in the
brake pedal.
WARNING
Check the operation of the brake
light after adjusting the rear
brake.