Table of Contents
Advertisement
Replacing the Fuser Cartridge/BTR
6-6
DP N17 User Guide
Secure the fuser cartridge by replacing the mounting screws that
8
were removed in Step 5 on page 6-5.
If you do not need to re-install the Duplex Module, close the rear
cover and skip to Step 11.
Insert the Duplex Module through the guide channels.
9
10
Make sure the green side-locks at both ends click into position.
Then close the rear cover.
11
Open the front cover and remove the EP cartridge by lifting it
towards the rear of the printer then pulling it up and out.
Advertisement
Table of Contents
