Clearing Area A (With
Duplex Module)
1
Remove any paper from the Face-up Tray,
then open the Duplex Module.
4
Close Door A, then reattach the Face-up Bin.
Follow the procedure below to clear a paper jam from Area A when
the Control Panel display reads
a Duplex Module installed on the printer.
2
Open Door A.
Chapter 5: Clearing Jams and Jam Recovery
If the Control Panel message indicates an
Area B jam, continue to the section
"Clearing Area B" (page 5-12).
C l e a r A r e a A
Paper Jams
and there is
5-9