Percent Plus (+%) Transactions - Olivetti ECR 3550 T euro Clerk Manual

PERCENT PLUS (+%) TRANSACTIONS

Applying the Programmed Percent Plus Rate to a
Total Sale
You can call up a programmed percent plus rate during
the transaction by pressing the [+%/PO] key. If a percent
plus rate is not programmed, type in the discount rate
before pressing the [+%/PO] key. Up to four digits can be
used for the percent plus rate (0-99.99%).
Example: Register a programmed 6.5% percent plus
rate to an entire sales transaction. Compute the change
tender.
Proceed as follows:
1. Type [250] and press the [department 7/27] key.
2. Type [99] and press the [department 3/23] key.
3. Press the [ST] key to display the current balance due.
4. Press the [+%/PO] key to apply the programmed add-
on. The amount added on is displayed.
5. Press the [ST] key again to display the new balance
due.
6. Type the amount tendered [500] and press the [Amt
Tend/Total] key. The change due to the customer is
displayed and the transaction ends successfully.
Applying a Random Percent Plus Rate to
a Total Sale
Example: Register a 20% percent plus rate to a sales
transaction. Compute the change tender.
Proceed as follows:
1. Type [300] and press the [department 1/21] key.
2. Type [250] and press the [department 2/22] key.
3. Press the [ST] key for the current balance due.
4. Type the percent plus rate to apply [20] and press the
[+%/PO] key. The amount added on is displayed.
5. Press the [ST] key for the current balance due.
6. Type the amount tendered [700] and press the
[Amt Tend/Total] key. The change due to the customer
is displayed and the transaction ends successfully.
GB-24
Transaction subtotal
Programmed percent
plus rate
Amount added on
Transaction subtotal
Random percent plus
rate
Amount added on