Recording On A Cassette Tape - Sharp CD-G10000V Operation Manual

Recording on a cassette tape

Before recording:
! When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
! SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
! The volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
! For recording, use only normal tapes. Do not use metal or
CrO tapes.
! Recording can be operated in the TAPE 2 compartment. The
TAPE 1 is for playback only.
Erase-prevention tab of cassette tapes:
! When recording on a cassette tape, make sure that the erase-
prevention tabs are not removed. Cassettes have removable
tabs that prevent accidental recording or erasing.
! To protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape with-
out the tab.
Side A
Tab for side B Tab for side A
04/3/22 CD-G10000V(Z)E4.fm
CD-G10000V
CP-G10000
ENGLISH
4
E-38
TINSZA092AWZZ