Aerial Connection; Speaker Connection - Sharp CD-G10000V Operation Manual

" Aerial connection

Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS terminal and posi-
tion the FM aerial wire in the direction where the strongest signal
can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP socket. Position the
AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better recep-
tion.
Installing the AM loop aerial:
< Assembling > < Attaching to the wall >
Wall

" Speaker connection

Front speakers:
Connect the black wire to the FRONT SPEAKERS (-) terminal, and
the red wire to the FRONT SPEAKERS (+) terminal.
Surround speakers:
Connect the black wire to the SURROUND SPEAKERS (-) terminal,
and the grey wire to the SURROUND SPEAKERS (+) terminal.
Front speaker (right)
Surround speaker (right)
Caution:
! Connect the speaker wires to the speakers first, then to the unit.
! Never mistake the FRONT SPEAKERS and the SURROUND-
SPEAKERS terminals. The unit or the speakers may be damaged.
! If you use other speakers with impedance lower
than that specified, the unit may be damaged. Front
speakers: 8 ohms Surround speakers: 16 ohms
! Do not mistake the right and the left channels. The
right speaker is the one on the right side when you
face the unit.
! Do not let the bare speaker wires touch each
other.
! Do not allow any objects to fall into or to be placed
Screws (not supplied)
in the bass reflex ducts.
! Do not stand or sit on the speakers. You may be in-
jured.
04/3/22
Front speaker (left)
Surround speaker (left)
Red Grey
Black
Incorrect
Incorrect
CD-G10000V(Z)E1.fm
TINSZA092AWZZ
CD-G10000V
CP-G10000
ENGLISH
4
E-10