Various Disc Functions - Sharp CD-G10000V Operation Manual

Video cd mini system/speaker system

Hide thumbs

Table Of Contents

Table of Contents

Notes:

" Whilst the disc is being read ("TOC READ" is displayed), you

cannot play another disc. The

1 -

(

SELECT/RESUME) button does not.

" Playback control allows a video CD to be played back according

to instructions recorded on the disc. The "previous", "next",

"return" and "select" operations may function differently, depend-

ing on the PBC CDs.

" Some video CDs with playback control may have an "auto

pause" recorded on them. When such a disc is played, the

screen will stop automatically at the point where an "auto pause

signal" has been inserted.

" If the picture looks dirty when a video CD is played back, there

may be a scratch on the video CD. Replace it with another video

CD in good condition.

Caution:

" Do not place two discs in one disc tray.

" Do not play discs with special shapes (heart- or octagon-shaped)

as it may cause malfunctions.

" Do not push the disc tray whilst it is moving.

" If the power fails whilst the tray is open, wait until the power is

restored.

" If the disc tray is stopped with force, "ER-CD20" will appear on

the display for 3 seconds and the unit will not function. If this

occurs, press the ON/STAND-BY button to enter the power

stand-by mode and then turn the power on again.

" If TV or radio interference occurs during CD operation, move the

unit away from the TV or radio.

" If a disc is damaged, dirty, or loaded upside down, the disc will

skip.

Auto power on function:

When you press any of the following buttons, the unit turns on.

" CD/VIDEO CD (CD) button (main unit and remote control): The

unit turns on and the "CD/VIDEO CD" function is activated.

(

SELECT/RESUME) button (main unit and remote

control): The unit turns on and playback of the last function starts

(CD/VIDEO CD, TAPE, TUNER, GAME).