Sharp CD-G10000V Operation Manual page 43

4
Within 10 seconds, press the
lect "ONCE SET" or "DAILY SET", and press the MEMORY/
SET button.
5
Press the or button to select "PLAY" or
"REC", and press the MEMORY/SET button.
White
The illustrations show the daily timer setting.
6
Press the or button to adjust the hour and
then press the MEMORY/SET button.
The illustrations show the timer playback setting in the daily tim-
er mode.
7
Press the or button to adjust the minutes and
then press the MEMORY/SET button.
8
Set the time to finish as in steps 6 and 7 above.
9
or button to se- Switch input with the
press the MEMORY/SET button.
To select the timer playback source: CD/VIDEO CD, TUNER,
TAPE 1 or TAPE 2.
To select the timer recording source: TUNER.
" When you select the tuner, select a station by pressing the
button.
" If a station has not been programmed, " NO P.SET" will be
Red
displayed and timer setting will be cancelled.
10
Adjust the volume using the VOLUME control, and then
press the MEMORY/SET button.
Do not turn the volume up too high.
11
Press the ON/STAND-BY button to enter the power stand-
by mode.
The "TIMER" indicator lights up and the unit is ready for timer
playback or timer recording.
04/3/22
or button, and then
or button, and then press the MEMORY/SET
Continued to the next page
CD-G10000V(Z)E5.fm
CD-G10000V
CP-G10000
ENGLISH
4
E-42
TINSZA092AWZZ