Video Cd Playback - Sharp CD-G10000V Operation Manual

Video CD playback

CD-G10000V
CP-G10000
ENGLISH
Playback control:
Video CDs that support "Playback control" can display still pictures.
This function can be used with video CD software (video CDs with
playback control) that have a playback method recorded on them.
You can select items you want to watch from the menu displayed on
the TV screen, or you can show still pictures.
Turn on the TV and set the input selector to "VCR".
E-21
! Playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD/VIDEO CD (CD) button.
3
Press the 1 button and within 5 seconds, press the
OPEN/CLOSE button to open the disc tray 1.
4
Place the disc on the disc tray 1, label side up.
Be sure to place 8 cm (3") disc in the middle of the disc trays.
12 cm (5")
5
Press the OPEN/CLOSE button to close the disc tray 1.
6
You can place discs on the trays 2 - 5 by following steps
3 - 5.
7
Press the / ( SELECT/RESUME) button to start
playback.
" Playback will begin from track 1 on the disc 1. After that disc fin-
ishes playing, the next disc will automatically play.
" After the last track on the fifth disc is played, the unit will stop
automatically.
" When there is no disc in one of the disc trays (1 - 5), the empty
tray will be skipped to the next tray with a disc.
To exchange other discs whilst playing a disc:
Press one of the 1 - 5 buttons for the stopped disc and within 5
seconds, press the OPEN/CLOSE button and exchange discs.
To remove the discs:
In the stop mode, press the 1 - 5 button and within 5 seconds,
press the OPEN/CLOSE button.
04/3/22 CD-G10000V(Z)E3.fm
8 cm (3")
TINSZA092AWZZ