Cd Playback - Sharp CD-G10000V Operation Manual

CD-G10000V
CD playback (continued)
CP-G10000
ENGLISH
MP3 disc:
MP3 is a form of compression. It is an acronym which stands for
MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant com-
pression from the original audio source with very little loss in sound
quality.
Notes:
! Due to the structure of its disc information, it takes longer to read
an MP3 disc than a normal CD (approximately 20 to 90 seconds).
! "
" indicator will light up after the unit reads information on an
MP3 disc.
! This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
! During VBR file playback, time counter in the display may differ
from its actual playback time.
" To change the display (MP3 discs only)
Whilst in the stop mode or playback mode, press the DISPLAY but-
ton.
Each time the button is pressed, the display will change as follows.
[When in the stop mode]
Total number of tracks
Track name
[When in the playback mode]
Track number Elapsed playback
time
Track name
E-31
" To select the desired folder or track by name
(MP3 discs only)
1
Whilst in the stop mode, press the DISPLAY button to dis-
play the folder name.
2
Select the desired folder by pressing the
3
Press the DISPLAY button to
display the track name.
4
Select the desired track by pressing the
5
Press the
RESUME) button to begin play-
back.
Note:
After selecting a disc with one of the
Folder name
will not change even if the DISPLAY button is pressed, and neither
the folder nor track name is displayed.
Folder name
04/3/22
or
or
/ ( SELECT/
1 - 5 buttons, the display
CD-G10000V(Z)E4.fm
TINSZA092AWZZ
button.
button.