Aerial Connection; Speaker Connection - Sharp XL-DV50H Operation Manual

! Aerial connection

Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS
socket and position the FM aerial wire in the di-
rection where the strongest signal can be re-
ceived.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP
socket. Position the AM loop aerial for optimum
reception. Place the AM loop aerial on a shelf,
etc., or attach it to a stand or a wall with screws
(not supplied).
Note:
Placing the aerial on the stereo system or near the AC power lead
may cause noise pickup. Place the aerial away from the stereo sys-
tem for better reception.
Installing the AM loop aerial:
< Assembling >
External FM aerial:
Use an external FM aerial if you require better reception. Consult
your dealer.
Downloaded From Disc-Player.com Sharp Manuals

! Speaker connection

Insert the front speaker plugs (black) into the FRONT terminals.
Insert the subwoofer plug (red) into the SUBWOOFER terminal.
Subwoofer
Red
< Attaching to the wall >
Caution:
" The supplied speakers are exclusively for XL-DV50H. Do not
connect them to other equipment, and do not connect other
speakers to XL-DV50H. It may cause malfunction.
" Use speakers with an impedance of 6 ohms or more, as lower im-
Wall Screws (not supplied)
pedance speakers can damage the unit.
" Do not mistake the right and the left channels. The right speaker
is the one on the right side when you face the unit.
" Do not allow any objects to fall into or to be placed in the bass re-
flex ducts.
" Do not stand or sit on the speakers. You may be injured.
External FM aerial
! Front speaker grills are removable
Make sure nothing comes into contact with the
speaker diaphragm when you remove the
speaker grilles.
04/3/19
Front speaker Front speaker
(right) (left)
Speaker or subwoofer plug in with the rising
side facing to the right.
Black
XL-DV50H(A).fm TINSEA027SJZZ
XL-DV50H
1
2
3
4
5
6
7
8
9
10
13