Main Unit - Sharp CD-DV650W Operation Manual

System connections (continued)
CD-DV650W
CD-DV850W
ENGLISH
Connecting a TV with Component video cable
H
GREEN
Notes:
I Change the TV input in accordance with the connected socket.
I Do not connect other equipment between the TV and this unit. If
they are connected via a VCR, pictures may be distorted.
I If your TV has different indications for the component video inputs
(Y, CB and CR or Y, B-Y and P-Y), connect sockets with its matching
colour.
I Do not connect to a component video input socket designed for the
high-vision system, which is not DVD-compatible (the images may
be distorted or not appear).
E-13
To Component
video input socket
BLUE
GREEN
RED
BLUE
TV

Main Unit

RED
Setting the AC voltage selector
H
Check the setting of the AC voltage selector located on the rear panel
Component
before plugging the unit into a wall socket. If necessary, adjust the
video cable
selector to correspond to the AC power voltage used in your area.
(not
Turn the selector with a screwdriver until the appropriate voltage
supplied)
number appears in the window (110 V, 127 V, 220 V or 230 V - 240
V AC).
Connecting the AC power lead
H
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket. If you plug the unit
first, the unit will enter the demonstration mode (see page 14).
Notes:
I The unit will start the tape initialisation when plugged in to the AC
socket. During this process, initialising sound will be heard and
the unit cannot be turned on. Wait until the process is finished.
I Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
AC Plug Adaptor
In areas (or countries) where a wall socket as shown in illustration 2
is used, connect the unit using the AC plug adaptor supplied with the
unit, as illustrated. The AC plug adaptor is not included in areas where
the wall socket and AC power plug can be directly connected (see
illustration 1).