Sharp CD-DV650W Operation Manual page 12

System connections (continued)
CD-DV650W
CD-DV850W
ENGLISH
Aerial connection
H
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS terminal and position
the FM aerial wire in the direction where the strongest signal can be
received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP socket. Position the AM
loop aerial for optimum reception. Place the AM loop aerial on a shelf,
etc., or attach it to a stand or a wall with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling >
E-11
< Attaching to the wall >
Screws (not supplied)
Wall
Speaker connection
H
FRONT SPEAKERS:
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Caution:
I Use speakers with an impedance of 6 ohms
or more, as lower impedance speakers can
damage the unit.
I Do not mistake the right and the left channels.
The right speaker is the one on the right side
when you face the unit.
I Do not let the bare speaker wires touch
each other.
I Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
I Do not stand or sit on the speakers. You may
be injured.
Red
6
Black
6
Incorrect