Removing And Reinstalling The Main Parts - Sharp CMS-R600X(BK) Service Manual

CMS-R600X/R600XT

REMOVING AND REINSTALLING THE MAIN PARTS

TAPE MECHANISM SECTION
Perform steps 1, 2, 3, 4, 5 and 8 of the disassembly method to
remove the tape mechanism.
How to remove the record/playback and erase
heads (TAPE 2) (See Fig. 8-1.)
1. Carefully bend the record/playback head pawls (A1) x 2
pcs., in the direction of the arrow <A> , and remove the
record/playback head upwards.
2. Carefully bend the three pawls (B1) x 3 pcs., in the arrow
direction <B>, and remove the erase head upward.
How to remove the playback head (TAPE 1)
(See Fig. 8-2.)
1. Carefully bend the playback head pawls (C1) x 2 pcs., in the
direction of the arrow <C>, and remove the playback head
upwards.
How to remove the pinch roller (TAPE 1/2)
(See Fig. 8-3.)
1. Carefully bend the pinch roller pawl in the direction of the
arrow <D>, and remove the pinch roller (D1) upwards.
Note:
When installing the pinch roller, pay attention to the spring
mounting method.
How to remove the belt (TAPE 1) (See Fig. 8-4.)
1. Remove the main belt (E1) x 1 pc., from the motor side.
How to remove the belt (TAPE 2) (See Fig. 8-4.)
1. Remove the tape 1 main belt (E1) x 1pc., from the motor
side.
2. Remove the tape 2 main belt (F1) x 1pc., from the motor
side.
3. Remove the FF/REW belt (F2) x 1 pc.
How to remove the motor
(See Figs. 8-4 and 8-5.)
1. Remove the belt.
2. Remove the screws (G1) x 2 pcs., to remove the motor
fixture.
3. Remove the screws (G2) x 2 pcs., to remove the motor.
Note:
When mounting the motor, pay attention to the motor mounting
angle.
(G1) x2
ø2 x4mm
(G2) x2
ø2 x4mm
Figure 8-5
Motor
Motor Bracket
TAPE 2
Erase Head
<B>
<A>
<B>
Pawl (B1) x3
Playback Head
<C>
Pawl (C1) x2
Pinch Roller (D1) x1
FF/REW Belt
(F2) x1
TAPE 2
Main Belt
(F1) x1
Flywheel
TAPE 2
TAPE 1
Main Belt
Main Belt
(F1) x1
(E1) x1
– 8 –
Record/Playback
Head
<A>
<B>
Pawl (A1) x2
Figure 8-1
TAPE 1
<C>
Figure 8-2
<D>
Pawl
Figure 8-3
Motor
TAPE 1
Flywheel
Main Belt
(E1) x1
Motor
Figure 8-4