Listening To The Radio - Sharp CD-DV650W Operation Manual

Listening to the radio

Auto power on function:
When you press any of the following buttons, the unit turns on.
I TUNER (BAND) button (main unit and remote control): The unit
turns on and the "TUNER" function is activated.
I 0 button on the remote control or main unit: The unit turns on and
playback of the last function starts (DVD/CD/TAPE/TUNER/GAME).
DVD MINI SYSTEM
CD-DV650
1 MIC 2 MIC LEVEL
MIN MAX
Tuning
H
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
3
Press the TUNING (X or W) button to tune in to the desired
station.
Manual tuning:
Press the TUNING button as many times as required to tune
in to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5
seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
Notes:
I When radio interference occurs, auto scan tuning may stop
automatically at that point.
I Auto scan tuning will skip weak signal stations.
I To stop the auto tuning, press the TUNING button again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
I "j" will appear when an FM broadcast is in stereo.
I If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural,
and the sound becomes clearer.
FM stereo mode indicator
FM stereo receiving indicator
CD-DV650W
CD-DV850W
ENGLISH
E-52