Registering And De-Registering Handsets; Manual Registration: Handset Gigaset Cl 1 To Gigaset Cl 100; Registering Other Handsets; De-Registering Handsets - Siemens Gigaset CL100 Operating Manual

Registering and de-registering handsets

You can register up to six handsets with your base station.
A Gigaset CL 1 handset that has not yet been registered with a base station is registered
automatically (see page 8). Handsets in the 1000 to 4000 Gigaset families, Gigaset
handsets A 2, C 1, C 2 and S 1, and handsets from other manufacturers must be
registered manually.

Manual registration: Handset Gigaset CL 1 to Gigaset CL 100

You must activate manual registration of the handset at both the handset and the base
station.
1. On the handset
¢
MENU REGISTER HS
¢
(default: 0000)
OK
During the following registration process, all symbols will flash in the display.
2. On the base
Within 60 secs. after the system PIN is entered:
Press the registration/paging key on the front of the base station for
approx. 3 secs.
The registration process then starts.
When registration is successful, the handset is automatically assigned
the lowest unassigned number.

Registering other handsets

Handsets in the 1000 to 4000 Gigaset families, Gigaset handsets A 2, C 1, C 2 and S 1,
and other GAP capable handsets can be registered.
The base station is prepared as described above, please refer to the operating
instructions for the device to register the handsets.

De-registering handsets

You can de-register a different handset from any registered Gigaset CL 1 handset.
¢
Select handset
INT
base station (default: 0000)
The internal number disappears from the de-registered handset. Handsets that have not
been de-registered retain their internal numbers.
¢ ¢
Enter the system PIN for the base station
OK
¢ ¢
MENU DE-REG H/SET
¢ ¢
OK DE-REGISTER?
Registering and de-registering handsets
¢ ¢
Enter system PIN for the
OK
¢
OK
17