Using Several Handsets; Registering Handsets - Siemens Gigaset S455 User Manual

Using several handsets

Registering handsets

You can register up to a total of six hand-
sets on your base station.
A Gigaset S45 handset can be registered
on up to four base stations.
Automatic registration Gigaset S45 to
Gigaset S450
Important: The handset must not already
be registered to any base station.
Registering the handset to the Gigaset
S455 base station occurs automatically.
¤
Place the handset in the base with its
display facing forward.
Registration takes around 1 minute. Dur-
ing this process,
Regstr.Procedure
in the display and the name of the base
station flashes e.g.
handset has registered, its screen displays
its internal number, e.g.
number 2. The handset is assigned the
lowest available internal number (1-6).
If all internal numbers 1-6 have been
assigned, number 6 is overwritten, pro-
vided the handset with the internal
number 6 is in idle status.
appears
Base 1. When the
for internal
INT 2
Please note:
– Automatic registration is not possible when
the base station on which you wish to reg-
ister the handset is being used to make a
call.
– Each key press interrupts the automatic
registration.
– If automatic registration does not work,
you will have to register the handset manu-
ally.
– You can change the name of the handset
(page 40).
Manual registration Gigaset S45 to
Gigaset S455
You must activate manual registration of
the handset at both the handset and the
base station.
After it has registered, the handset returns
to idle status. The internal number of the
handset appears in the display, e.g.
If it does not, repeat the procedure.
On the handset
¢ ¢
v Ð
Handset
s
Select base station, e.g.
and press
~
Enter the system PIN of the
base station (the default is
0000) and press
screen will display, e.g.
On the base station
Within 60 secs. press and hold the regis-
tration/paging key on the base station
(page 2) (approx. 3 secs.).
Using several handsets
INT 1.
¢
Register H/Set
Base 1
.
§OK§
. The
§OK§
Base 1.
37