Siemens Gigaset S455 User Manual page 38

Number codes for operation:
A B
Previous Stop/cont.
D E
G H
: 0
New Delete
Operating the answering machine with
voice prompts
You can control message playback using
the voice commands "BACK" und "FOR-
WARD". You can delete individual mes-
sages during playback using the voice
command "DELETE".
¤
Before each voice command, press 9
and then speak the command when
you hear the ready tone.
When deleting a message you are
prompted to repeat the command.
¤
Repeat "DELETE", without first press-
ing the 9.
Activating the answering machine
Phone home and allow to ring until you
hear: "Please enter PIN".
~
Enter system PIN.
Your answering machine is activated. It
tells you how much memory time is left.
The messages are now played back.
The answering machine cannot be deacti-
vated remotely.
3
Next
F
9
Begin
;
Operating the answering machine
Initiating call back from the answering
machine with SMS and listening to
messages
Requirement: You must have stored a
notification number (see page 26).
You can use the telephone (mobile phone
or any other device with SMS functional-
ity) whose notification number is stored in
your phone to send an SMS to your
answering machine when you are away
from home. It will then call you back.
When you accept the call and press any
key (or use a code transmitter) the mes-
sage playback begins.
The SMS must contain the following:
*<System PIN>*<Callback number>*
The callback number is optional.
Examples:
*4711* or *4711*089123456*
If a callback number is entered then it is
dialled; otherwise the notification number
is dialled.
You can now operate the answering
machine via the keypad or by voice
prompts as described in the previous sec-
tions.
35