Timer And Sleep Operation - Sharp XL-E15H Operation Manual

Timer and sleep operation

Timer playback
Before setting timer:
1 Check that the clock is set to the correct time (refer to page 7).
If it is not set, you cannot use the timer function.
2 For timer playback, load the disc to be played back.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button for about 2 seconds.
3 Within 10 seconds, press the CLOCK/TIMER button.
4 Press the PRESET ( or
CLOCK/TIMER button.
5 Press the PRESET (
press the CLOCK/TIMER button.
6 Switch input with the PRESET (
"TMR-OFF" and then press the CLOCK/TIMER button.
7 Press the PRESET ( or
the CLOCK/TIMER button.
8 Press the PRESET (
press the CLOCK/TIMER button.
9 To select the timer playback source, switch input with PRESET
( or ) button to select "SOURCE".
PRESET PRESET
) button to set hour then press the
or ) button to set minute and then
or ) button to select
) button to set hour and then press
or ) button to set minute and then
10 To select CD, press the
the CLOCK/TIMER button.
XL-E15 XL-E15
11 To select TUNER, press the TUNER (BAND) button and then
press the CLOCK/TIMER button.
AUDIO IN AUDIO IN
12 Select a station by pressing the PRESET (
then press the CLOCK/TIMER button to set the station selected.
13 To select a preset channel number, press the PRESET (
) button and then press the CLOCK/TIMER button.
14 The " " indicator lights up and the unit is ready for timer
playback.
15 Press the ON/STAND-BY button to enter the power stand-by
mode. Press the CLOCK/TIMER button to confirm the timer
setting.
16 When the preset time is reached, playback will start. "
indicator will blink to show timer playback.
17 When the timer end time is reached, the system will enter
the power stand-by mode automatically.
Checking the timer setting:
1 Press the CLOCK/TIMER button repeatedly to view as follow:
Cancelling the timer setting:
Press the SLEEP button for 2 seconds. The "
disappear and the display show "TMR-OFF".
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the
same setting, press the SLEEP button for 2 seconds.
The " " indicator light up and the display show "TMR-ON".
Notes:
After selecting the playback source, when press the
CLOCK/TIMER button to confirm, "SOURCE" will appear and
blink for 2 seconds, then change to last function.
When the preset time is reached, playback will start at current
setting if no selected playback source is made.
The volume cannot be preset during timer setting.
E-13
/ (CD / ) button and then press
OR
or ) button and
OR
" indicator
or
"