Table of Contents
Advertisement
Setting the clock
ON/ STAND-BY
ON/ STAND-BY
PRESET
PRESET
ON
ON
STAND-BY
STAND-BY
PRESET
PRESET
In this example, the clock is set for the 24-hour (00:00) display.
1
In STAND-BY condition.
2
Press the CLOCK/TIMER button for more than 2 seconds.
3
Within 10 seconds, press the PRESET (
hour.
4
Press the CLOCK/TIMER button again.
5
Within 10 seconds, press the PRESET (
minute.
6
Press the CLOCK/TIMER button again.
To confirm the time display:
Press the CLOCK/TIMER button. The time display will appear for
about 5 seconds.
To readjust the clock after a power failure or unplugging the
unit or after unit is reset:
Perform "Setting the clock" from beginning.
Note:
To reset the clock if the power fails or is unplugged, the unit must be
in the STAND-BY mode.
MICRO COMPONENT SYSTEM
MICRO COMPONENT SYSTEM
ON/ STAND-BY
ON/ STAND-BY
PRESET
PRESET
PHONES
PHONES
or
) button to set
or
) button to set
Listening to a CD or MP3/WMA disc
This system can play back a standard CD, CD-R/RW in the CD
format and CD-R/RW with MP3 or WMA files, but cannot record on
them. Some audio CD-R and CD-RW discs may not be playable due
to the state of the disc or the device that was used for recording.
XL-E15
XL-E15
MP3:
REMOTE
REMOTE
SENSOR
SENSOR
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
AUDIO IN
AUDIO IN
in sound quality.
This system supports MPEG 1 Layer 3, and VBR files.
During VBR file playback, time counter in the display may differ
from its actual playback time
Bitrate which is supported by MP3 is 32 ~ 320 kbps.
CLOCK
CLOCK
TIMER
TIMER
WMA:
WMA files are Advanced System Format files that include audio
files which are compressed with Windows Media Audio codec.
WMA is developed by Microsoft as an audio format file for
Windows Media Player.
Bitrate which is supported by WMA is 64 ~ 160 kbps.
E-7
Advertisement
Table of Contents
