General Control - Sharp XL-E15H Operation Manual

General control

ON/ STAND-BY ON/ STAND-BY
ON/ STAND-BY ON/ STAND-BY
FUNCTION FUNCTION
PRESET PRESET
ON ON
STAND-BY STAND-BY
To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
At STAND-BY mode, red indicator will light up.
Auto power off function
In the stop mode of CD operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
Volume auto set-in
If you turn off and on the main unit with volume set to 16 or
higher, the volume will start at 16.
If you turn the unit off then on again with the volume level set to
less than 15, it will turn on again in the level set.
Volume control
Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOL (+ or –) button to increase or decrease the volume.
MICRO COMPONENT SYSTEM MICRO COMPONENT SYSTEM
XL-E15 XL-E15
REMOTE REMOTE
SENSOR SENSOR
PHONES PHONES AUDIO IN AUDIO IN
MUTE MUTE
VOL VOL
X-BASS X-BASS
EQUALIZER EQUALIZER
MIN .....
30 MAX
E-6
Extra bass control (X-BASS)
When the X-BASS button is pressed, the unit will enter the extra
bass mode which emphasises the bass frequencies and "X-BASS
ON" will appear.
To cancel the extra bass mode, press the X-BASS button until
"X-BASS OFF" appear.
Function (on main unit only)
When the FUNCTION button on main unit is pressed, the current
function will change to different mode. Press the FUNCTION button
repeatedly to select desired function.
CD
AUDIO IN
Note:
The backup function will protect the memorised function mode
(except clock) for a few hours should there be a power failure or the
AC power lead becomes disconnected.
Muting
The volume is muted temporarily when pressing the MUTE button
on the remote control. Press again to restore the volume.
Equaliser
When the EQUALIZER button on the remote control is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER button repeatedly until the desired
sound mode appears.
FLAT
ROCK
CLASSIC
POPS
JAZZ
TUNER