System Connections - Sharp XL-E15H Operation Manual

System connections

Make sure to unplug the AC power lead before making any connections.
Right speaker
Speaker connection
(see page 5)
Aerial connection
Attached FM aerial:
Position the FM aerial wire in the direction where the strongest
signal can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM loop aerial socket. Position the
AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Aerial connection (see page 4)
AM loop aerial
FM aerial
E-4
AC power connection (see page 5)
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling >
Left speaker
< Attaching to the wall >
Wall Screws
(not supplied)