Selecting The Recording Picture Size Manually; Selecting The Hdmi Picture Size Automatically; Other Picture And Audio Settings; Adjusting Image Position - Sharp Aquos LC-32B20E Operation Manual

useful Viewing functions
Selecting the recording picture size
manually
Digital Setup
reC picture Size
You can use this menu to set the appropriate picture
size for viewing a 16:9 format TV programme on a 4:3
TV.
Setting to "4:3 tV"
note
• This function must be set before recording.
Selecting the HDmi picture size
automatically
Setup
HDmi auto View
This function allows you to automatically change to the
appropriate picture size when viewing an HDMI signal
using the EXT 4, 5 and 6 terminals.

other picture and audio settings

adjusting image position

Setup
position
For adjusting a picture's horizontal and vertical position.
item
H-pos.: Centres the image by moving it to the left or right.
V-pos.: Centres the image by moving it up or down.
note
• Adjustments are stored separately according to input
source.
• Depending on the input signal type or WIDE MODE setting,
a position setting may not be available.
0
Setting to "16:9 tV"

reducing noise on the screen

option
Dnr
DNR (Digital Noise Reduction) produces a clearer
image. (Off, High, Low)

automatic volume adjustment

option
auto Volume
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. The Automatic Volume Control
(Auto Volume) reduces this problem by equalizing
levels.

Clear Voice

option
Clear Voice
This function emphasises speech against background
noise for greater intelligibility. It is not recommended for
music sources.

audio only

option
audio only
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
item
off: Both screen images and audio are output.
on: Audio is output without a screen image.